The Standard in Rugged Power Products

Home Up Products Representation Employment News Resources Search Feedback

ETI0001-1488A1 5.0 kVA All of these products are manufactured by ETI in the United States.

Up
ETI0001-1402 1.5 kVA
ETI0001-1403 1.5 kVA
ETI0001-1406 3.0 kVA
ETI0001-1417 1.5 kVA
ETI0001-1419 2.0 kVA
ETI0001-1420, 1.0 kVA
ETI0001-1429 2.4 kVA
ETI0001-1437 2.0 kVA
ETI0001-1438 2.0 kVA
ETI0001-1439 4.0 kVA
ETI0001-1442 4.0 kVA
ETI0001-1443 2.0 kVA
ETI0001-1444 2.0 kVA
ETI0001-1445 2.0 kVA
ETI0001-1447 2.0 kVA
ETI0001-1450 2.0 kVA
ETI0001-1451 4.0 kVA
ETI0001-1451AA 4.0 kVA
ETI0001-1452 4.0 kVA
ETI0001-1452AA 4.0 kVA
ETI0001-1453 4.0 kVA
ETI0001-1455 4.0 kVA
ETI0001-1456 4.0 kVA
ETI0001-1458 2.0 kVA
ETI0001-1467 2.0 kVA
ETI0001-1473 2.0 kVA
ETI0001-1473AA 2.0 kVA
ETI0001-1473AF 2.0 kVA
ETI0001-1473A 2.0 kVA
ETI0001-1473B 2.0 kVA
ETI0001-1474 2.0 kVA
ETI0001-1479 1.0 kVA
ETI0001-1482 2.0 kVA
ETI0001-1483 2.0 kVA
ETI0001-1486 2.0 kVA
ETI0001-1488 5.0 kVA
ETI0001-1488A1 5.0 kVA

Part Number: ETI0001-1488A1 
Rugged Mil Spec® 5000 VA UPS
120 VAC Power Source with
3-Phase Input and 1-Phase Output
Rackmount UPS and Intelligent
Power Distribution Unit Combination

Military Power® Mil Spec N5 Configuration
5000 VA Rugged Rack Mount Isolated AC and DC UPS w/ Integrated
8 Circuit, 2 Pole, Intelligent, Solidstate Power Distribution Unit
Intelligent SNMP/HTTP Interface

5.0 kVA, 3 Phase Rugged MilSpec UPS/PDU Front View
P/N: ETI0001-1488A1 Rugged Mil Spec UPS and PDU Standard Front 
Panel Layout

5.0 kVA, 3 Phase Rugged MilSpec UPS/PDU Rear View
P/N: ETI0001-1488A1 Rugged Mil Spec UPS and PDU Standard Rear 
Panel Layout

The field proven Military Power® UPS line is ideally suited for military, industrial, computer and telecommunications applications requiring high reliability, rugged construction, compact size and light weight design. These units are equally suited for use in shipboard, airborne, vehicular, field deployed or fixed locations with controlled or uncontrolled environments. The ETI0001-1488A1 was specifically designed for systems requiring high density power with 3-phase input. The ETI0001-1488A1 does not require a separate PDU since the PDU functions are already integrated into the UPS module. This saves rack space, cabling and expense while improving overall reliability. 

The heavy-duty chassis occupies only 6U (10.5”) of rack space for the electronics module and 2U (3.5”) for the battery module. The rounded metal corners and rugged handles, both front and rear, aid in safe handling. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration in any axis. These units can be mounted horizontally or vertically. Optional heavy-duty rack slides provide easy installation and removal of the unit with full extension.

The internal shielded input transformer provides galvanic isolation with provisions for nominal 208 VAC, 3-phase input voltages. Special EMI/RFI filters and input power factor correction minimize both input current and harmonics. The input circuit breaker and the isolation transformer provide an isolated source for all installations including shipboard systems or overseas locations where phase references and grounding are not consistent. 50 or 400 hertz outputs are available as an option. 

The LED arrays keep the operator informed as to the unit's status including load and battery levels. The high intensity audible alarm can be heard in high noise environments and includes an audible disable switch. All controls and protective devices are brought to the front and rear panels with critical switches or circuit breakers having finger guards. Further, all front panel devices are recessed to prevent damage or accidental operation. The internal intelligent PDU allows control of the individual output circuits incorporating thermal and interlock interfaces for additional control and safety.

The rear panel provides locking MS threaded metal shell connectors for the input and output power with various optional configurations available. The Status connector provides an interface with optional computer software providing loss of AC and low battery status as well as remote shut down capability.

This unit draws air through the front air filter and exhausts out the rear vent into the rack. This allows the unit to be used in negative or neutral pressure racks. For positive pressure racks, rear to front or rear to side versions are available. The removable and washable metal screen air filters and high capacity stainless steel ball bearing fans provide added protection in both controlled and hostile environments. 

The ETI0001-1488A1 has the added benefit of having a field replaceable battery via separate rackmount battery modules. The batteries are maintenance free with immobilized electrolyte and are constructed of flame retardant materials. For more information, see the Battery Technology section. 

Maintaining documentation for equipment in the field has always been an issue. Instead of having to carry or locate the equipment documentation, the ETI0001-1488A1 includes the built-in eDocs Port™, a patented feature unique to Energy Technologies, Inc. This flash drive contains all the relevant documentation for the unit at hand. This includes Operation and Maintenance manuals as well as training and troubleshooting guides. Utilizing a standard USB interface, these standardized electronic documents are readily available to the user.

See the Power Distribution Units section for a listing of stand alone PDUs. See the N3 Series UPS section for UPS without the integrated PDU and remote control.

Overall, the Rugged Power line is uniquely qualified for critical shipboard, vehicle, airborne or land based systems combining advanced modular design features with highly reliable construction.

Technical Specifications:
P/N: ETI0001-1488A1

AC OUTPUT
Output voltage: 120 VAC true sinewave standard
Output rating: UPS 5000 VA standard in 6U chassis x 23.5" deep 
0.65-0.75 pf standard
Non-linear load capacity: Up to 100% non-linear load capability w/o derating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step
Overload surge capacity: 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 Hz ± 2.5% synchronized to utility
60 Hz ± 1.0% w/ utility not available
50, 400 or 1000 Hz output available as an option
Operational status AC Input status, UPS operational, UPS alarm, Battery level, Low battery, Load level, Overload LEDs, Alarm contacts for Loss of AC and Low Battery
+90 dB audible alarm with audible on/off switch, 10BaseT Ethernet SNMP/HTTP port
AC INPUT
Input voltage: Nominal 208 VAC L-L, 3-phase
Input voltage tolerance: UPS 148-234 VAC @ full load without using battery
Input frequency: From 46 Hz to 70 Hz standard, optional to 440 Hz
Input power factor: Better than 99% typically
Input/output isolation: 6000 VA, up to 120 dB common mode, <1.0 mA leakage
Input transient suppression: Complies with IEEE 587 and UL 1449
Input control/protection: Guarded 3 pole 100 G shock rated circuit breaker (CB1)
plus UPS input fuses (F2A, F2B and F2C)
Input power connections: MS 3102R-24-22P, 4 pin, locking
EXTERNAL BATTERY
External battery type: Maintenance free immobilized electrolyte,
Flame retardant materials (Oxygen Index 28+)
External battery life: Rated for continuous service life of 5 years
External DC protection: Panel mounted fuse standard, breaker optional
External battery time: 5 minutes typical
External battery recharge: Recharged to nominal in 8 hours
DISTRIBUTION PANEL
Output circuits: Eight controlled outputs via solidstate relays
Output control: Local/remote control panel w/individual load switches
Thermal and remote interlock ON/OFF control
Output receptacles: NEMA 5015R threaded locking, various options
MECHANICAL
Dimensions (H x D x W):
  6U UPS Module
  2U Battery Module

10.5 6U) x 23.5 x 19.0 in (267 x 597 x 483 mm)
3.50 (2U) x 23.5 x 19.0 in (89 x 597 x 483 mm)
Rack Slide Mount Patterns: Jonathan, General Devices patterns standard, others optional
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Unit weight: Total
  UPS Module
  2U Battery Module
297 lb. (135 kg) with lift handles front and rear
197 lb. ( 90 kg) with lift handles front and rear 
100 lb. ( 45 kg) with lift handles front and rear
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, positive pressure, forced air
Cooling air direction: Front intake, exhaust to rear
Air intake filter: Washable metal filter media, others optional
ENVIRONMENTAL
Storage temperature: -40° to 158° F ambient (-40° to 70° C) with fully charged batteries
Operating temperature: 32° to 122° F ambient ( 0° to 50° C), lower/ higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m)
Operating elevation: Up to 15,000 ft (4,572 m), higher optional
STANDARDS
United States: Meets UL-1778 standard for UPS equipment,
MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022; MIL STD 461 
OPTIONAL ACCESSORIES
  Autoranging International Input, Cold Start, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software InterfaceTransport Cases, Slides and Mounting Kits

This page was last modified on: March 18, 2012
The N5 is one of the most popular configurations for new programs!

  Request Information

The N5 is one of the most popular configurations for new programs! Click for close up view of controls

Home Up Products Representation Employment News Resources Search Feedback

Send questions or comments about this web site to sales@ruggedsystems.com.
Copyright © 1991-2012 Energy Technologies, Inc. All Rights Reserved. Last modified: April 10, 2012
1st Energy™, 1st Power™, 911 Power™, AC anytime™, AC anywhere™, AC backup™, Airborne UPS™, Air Force Backup™, Air Force UPS™, Army UPS™, Backup AC™, Backup Source™, Backup The Web™, Battle Power™, Blackout Prevention™, Business Back UPS™, clean UPS™, Coast Guard Power™, Coast Guard UPS™, Controlling Power™, DC backup™, Disaster Recovery Gear™, Eco Power Source™, eDocs Port™, Energy Tech™, ETI™, Expeditionary Solar™, Extreme Power Source™, Global Power Source™, Global UPS™, Homeland Security Surveillance™, Humanitarian Power™, Hybrid Energy Storage™, Improved Power™, Industrial Backup™, Intelligent PDU™,  Intelligent UPS™, Internet Power Manager™, Lab Power™, Lab UPS™, Light UPS™, Know Power™, Marine Corps Power™, Marine UPS™, Medical Grade Power™, Military Backup™, Navy Power™, Navy UPS™, Network Power Manager™, Office UPS™, open UPS™, Personal Power Source™, Petro Chem Power™, Pipeline Power™, Portable Power Plant™, Powering The Net™, Power Protection™, Power Security™, Preventing Blackouts™, Radar Power™, Railroad Power™, Redundant Power™, Renewable Source™,  Rugged Power™, Rugged Systems™, Rugged UPS™, SCADA power™, Security Gate Power™, Shipboard Power™, Shipboard UPS™, Signal Backup™, Solar Backup™, Solar Power Source™, Soldier Power™, Tactical Computers™, Tactical Medical Office™, Tactical Office™, Tactical Solar Fly™, Tactical Trailer™, Tactical Water Plant™, Telecom Power Source™, the Warfighter™, Traffic Backup™, Traffic Signal Backup™, UPStart™, Utility Backup™, and Warfighter Power™  are trademarks of Energy Technologies, Inc.

Airborne Power®, Diplomatic Power®, Expeditionary Power®, Extreme UPS®, Hybrid Energy Technologies®, Industrial Power Source®, Military Power®,  Mil Spec®, Personal Solar®, Tactical Cables®, Tactical Cooling®, Tactical Computer Workstation®, Tactical Data Vault®, Tactical Field Office®, Tactical Fuel Cells®, Tactical Generator®, Tactical Inverter®, Tactical Micro Grid®, Tactical Power®, Tactical Power Plant®, Tactical Shelter Systems®, Tactical Solar®, Tactical Solar Shelter®, Tactical UPS®, Tactical Vehicle Power®, Tactical Wind Turbine® and Ultimate Survival Gear® are registered trademarks of Energy Technologies, Inc.

Legal Statements